﻿V1.0.66 ( 29.04.2021)
- New feature added: Alarm temperature limit: Roof alarms deactivated when temperature is < 5°C on any Monitors. This is to avoid false alarms due to ice and snow. The roof alarms will reactivate when the temperature is >5°C on all Monitors. The temperature limit can be configured in the config file.

- Minor bug fixes

To install the new software, follow these steps:
1. Press the push button for 5 seconds - this allows the SD card to be ejected. 
2. Copy the update file (update1.0.60.bin) to the SD card.
3. With the SD card reinstalled in the Monitor, the Gateway will reboot, and the new software will automatically be installed - the -bin file will automatically be removed from the SD card after a successful update.

DO NOT TURN OFF POWER DURING UPDATE!

____________________________________


V1.0.60 (25-11-2020) 
- New feature added: Automatic reset of Modbus registers: 1’st Blocked drain Alarm Monitor ID (12953) and 1’st Blocked sensor Alarm Monitor ID (12954).
- Minor bug fixes 

To install the new software, follow these steps:
1. Press the push button for 5 seconds - this allows the SD card to be ejected. 
2. Copy the update file (update1.0.60.bin) to the SD card.
3. With the SD card reinstalled in the Monitor, the Gateway will reboot, and the new software will automatically be installed - the -bin file will automatically be removed from the SD card after a successful update.

DO NOT TURN OFF POWER DURING UPDATE!
